Cleaning & Maintaining; After Each Use - Mr. Coffee ECM170 SERIES User Manual And Recipe Book

CLEANING YOUR MACHINE

AFTER EACH USE

Keep your Mr. Coffee
taking care of it after every use. Follow these easy
steps to clean your machine:
2
3
4
8
machine running smoothly by
®
1. Rinse ceramic mug. Remove the drip tray cover. Empty water
or coffee from drip tray. Dry with a clean cloth. Wipe the
exterior of the machine with a damp cloth. Do not use metal
scouring pads or abrasive cleansers.
Do not remove water reservoir cap or
CAUTION:
portafilter until you release the pressure in the unit.
2. Remove portafilter, discard coffee grounds. Lift filter retainer clip
over the filter and hold in place as you discard coffee grounds.
This helps keep filter secured in place.
3. Rinse portafilter with fresh water. Please note that the portafilter is
NOT dishwasher safe. Handwash only!
NOTE: If you did not froth milk, skip steps 4-9.
4. Fill water measuring cup to the steam mark with water and pour
into the water reservoir.
5. Screw cap back onto the water reservoir and plug in the machine.
6. Fill ceramic mug half way with water and place so that the frothing
wand is submerged into the water.
7. Turn the knob to "Steam" and steam with water instead of milk for
30 seconds. This will help rinse the internal parts of the machine.
8. Once the frothing wand is cool, remove and rinse frothing wand
cover. The frothing wand cover is the black rubber piece at the tip
of the frothing wand. Simply pull from the bottom to remove.
9. Wipe down frothing wand with a damp cloth and rinse the frothing
wand cover.
CAUTION: To protect against electric shock, do not
immerse cord, plug or appliance in water or other liquids.
11