Table of Contents
Advertisement
> Before Start
> Part Names
> Install
> Initial Setup
> Playback
> Advanced Manual
Troubleshooting | Supplementary Information, etc.
8. Connect Other Cables
Antenna Hookup
Move the antenna around while playing the radio to find the
position with the best reception. Use a thumb tack or similar
to attach the indoor FM antenna to a wall.
Network Hookup
a
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy network features such as
internet radio by connecting the unit to the network. If you
connect by wired LAN, connect with an Ethernet cable to
the ETHERNET port as shown in the illustration. To connect
by Wi-Fi, then after selecting "Wireless" in "3. Network
d
Connection" (P25) in Initial Setup, select the desired setting
method and follow the onscreen instructions to configure
the connection.
Power Cord Hookup
This unit includes a removable power cord. Connect the
power cord to the power outlet after completing all other
connections. Connect the power cord to AC INLET of the
unit and then connect to the outlet. Always disconnect the
outlet side first when disconnecting the power cord.
c
b
1
a Indoor FM Antenna, b AM Loop Antenna, c Ethernet Cable, d Power Cord
En
23
Hide quick links:
Advertisement
Table of Contents
