Table of Contents
Advertisement
About Dante
About redundant networks
A redundant network consists of two circuits, a primary cir-
cuit and a secondary circuit. Normally, the network operates
on the primary circuit. However, if the primary connection is
broken, the secondary circuit will automatically take over
audio communications. Therefore, using a redundant net-
work with a star topology would increase resiliency against
unexpected network problems relative to a daisy chain net-
work.
NOTE
The computer that's running MTX-MRX Editor must be con-
nected to the [PRIMARY] connector of the MRX7-D. For
details on connections, refer to "MRX Setup Manual."
Computer
Network
switch A
MRX7-D (ID#1)
MRX7-D (ID#2)
MRX7-D (ID#3)
Primary Dante
Secondary Dante
16
MRX7-D Owner's Manual
Network
switch B
88
88
88
About Dante Controller
Dante Controller is a software application that allows config-
uration and audio routing of Dante networks. Use Dante
Controller if you need to make connections and settings for
devices not supported by MTX-MRX Editor, or if you need
to specify complex signal routings on the Dante network.
More information is posted on the following website.
http://www.yamahaproaudio.com/
To run Dante Controller, a computer must feature a GbE-
compatible Ethernet connector.
Refer to the Dante Controller owner's manual for details on
Dante Controller.
Hide quick links:
Advertisement
Table of Contents
