Write Text; Traditional Text Input - Nokia E51 User Manual

4. Close the back cover.
Use a memory card
To format a memory card for your device, select
Format memory card. When a memory card is formatted,
all data on the card is lost permanently. Consult your
retailer to find out if you must format the memory card
before you can use it.
To change the name of the memory card, select
Memory card name.
You can protect a memory card with a password to prevent
unauthorised access. To set a password, select
Set password. The password can be up to eight characters
long and is case-sensitive. The password is stored in your
device. You do not need to enter it again while you use the
memory card in the same device. If you use the memory
card in another device, you are asked for the password.
Not all memory cards support password protection.
To remove the memory card password, select
Remove password. When you remove the password, the
data on the memory card is not protected against
unauthorised use.
To open a locked memory card, select
memory card. Enter the password.
Eject the memory card
Important: Do not remove the memory card in the
middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may
damage the memory card as well as the device, and data
16
stored on the card may be corrupted.
Cyan Cyan Cyan Cyan
1. Press the power key briefly, and select
memory card.
2. Press the release button and slide off the back cover.
Options
>
3. Press the end of the memory card to release it from the
memory card slot.
4. Close the back cover.

Write text

Options
>
The input methods provided in the device may vary
according to different sales markets.
Options
>

Traditional text input

is shown on the top right of the display when you
are writing text using traditional text input.
and indicate the selected case.
Options
>
indicates that the first letter of the sentence is written in
uppercase and all the other letters are automatically
written in lowercase.
To write text with the keypad, press a number key 2-9
Options Unlock
>
repeatedly until the desired character appears. There are
more characters available for a number key than are
printed on the key. If the next letter is located on the same
key as the present one, wait until the cursor appears, and
enter the letter.
To insert a number, press and hold the number key.
To switch between the upper and lower case mode and
the number mode, press #.
Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
Remove
indicates the number mode.