Setting The Hotel Option Data - Samsung HG32EE590 Installation Manual

To enter: Press the MUTE
set.)
To exit from this menu : power off and turn on again.
✎ Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function
Category Item
Hospitality
Hospitality Mode
Mode
SI Vendor SI Vendor
Power On Channel
Power On Channel
Num
Power On Channel
Type
Power On Volume
Power On
Power On Volume
Num
Min Volume
Max Volume
Power On Source
Power On Option

Setting the Hotel Option Data

→ 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is
Initial value
Standalone
OFF
Last Saved
1
ATV
Last Saved
10
0
100
TV
Last Option
Select Hospitality mode.
• Interactive mode : TV works with an SI STB or SBB.
• Standalone mode : TV works alone, without an SI STB or SBB.
• Interactive mode : Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere /
Quadriga / ETV / IBahn / Magilink / Otrum / Siemens / Amino / MDC / Enseo
• Standalone mode : OFF / Movielink / Swisscom / Smoovie / SSCP
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type manually. See
Power On Channel and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
Select channel band : AIR (analogue air band), DTV (digital air band), CATV
(analogue cable band), CDTV (digital cable band)
• User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
• Last Saved : When the TV is turned on, it returns to the volume that had been
set when the power had been turned off.
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
The maximum Volume Level the user can set in Stand Alone Hospitality mode.
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you
have unplugged the TV and then plugged it in again.
• Last Option : Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Description
21
English