i2000 UserÕs Guide
Adding and Storing a Talkgroup
To add and store a talkgroup name to your i2000:
1. Press
until you see the "Prgm" menu selection.
2. Select "Prgm".
3. Press
,
.
4. Select "Ok".
5. At "Add New Entry?", select "Ok".
6. At "Enter ID", enter the desired talkgroup number and select
"Store".
7. At "Enter Name", enter a name for the talkgroup and select
"Store".
Area Selection
In Group mode, you can call only those talkgroup members in a specific
location. This is useful when you know where the individuals are
located within the service area.
1. Press
M
until you see "Group Ready" on your display.
o
d
e
2. Press
, then select "Area".
3. Press
or
by your local carrier.
4. Select "Ok" to select the targeted area.
Private/Group Mode Speaker
You can hear Group calls through either the earpiece or the speaker.
Press the Speaker button
Mode Speaker on or off.
With the Speaker on, you will hear incoming calls through the speaker.
This is useful to monitor talkgroup activity in Group mode.
With the Speaker off, you will hear incoming calls through the earpiece.
44
to scroll through the targeted areas specified
on the i2000 to turn the Private/Group