Setting The Source Volume Control - Subaru Impreza 2012 Instruction Manual

• To fine adjust, touch any of the balance adjusting buttons
, , or
When you touch and hold one of the balance adjusting buttons
, , or
but stops at the center value. To continue to change the
balance, touch one of the balance adjusting buttons again.
• You can also adjust to the desired balance by touching the
screen.
• Touch Center (Center) to cancel the Fader/Balance setting and
return to the center value.
• After completing the adjustment, touch
adjusted settings and return to the Sound Settings screen.
NOTE
You cannot set the volume balance at the same time as positioning selector
adjustments.
to change the value by 1 step.
, the value changes continuously
to save the

Setting the Source Volume Control

1
On the Sound Settings screen, touch
• You can set a volume difference for each audio mode. The
differences between the volume of the FM mode in the initial
setting (initial value: 19), which is used as reference, and the
volume levels set for each audio mode are saved.
• After completing the adjustment, touch
adjusted settings and return to the previous screen.
Setting example:
Audio mode FM AM
Initial value Reference 0
(Volume level) (19) (19)
SVC setting Reference +15
(Volume level) (19) (34)
When volume 35 34 50
level is adjusted
from 19 35 in
FM mode
Basic Operation
or in SVC.
- +
to save the
CD USB BT-Audio
0 0 0
(19) (19) (19)
-10 +5 -5
(9) (24) (14)
9 25 24 40 14 30
Audio and Visual 207