Install Battery And Uim Card - Haier D1200 User Manual

# key:
In idle mode ,"#" key can use to switching from meeting mode to normal mode.
Volume side key
You can adjust microphone's volume using side keys directly during a call. You can adjust key
tone volume in idle mode.
Recording Key:
If User press recording key during the call, Voice get recorded and complete after the call ends.
To retrieve the Recording, click Tools→Voice Memo.
1.2 Idle mode screen
Depending on your wireless service provider, some or all of the following indicators and icons
may appear on the standby mode.
When the phone is powered on, the following icons may display:
Explanations of icons
Battery level Indicator for
Navigation of bars from right to left display the charging of the battery.
If charging bars stop navigating or display show "Charge Complete" means battery is charged
fully.
Message
The icon is displayed when a new message arrives. The icon disappears when you read all the
unread messages.
Alarm clock
That indicates function that the alarm clock has been activated.
Network
Composed of two parts. The left part indicates that the mobile phone is duly registered to a
network. The right part shows the signal strength.

1.3 Install battery and UIM card

Install the battery
Push the top part of the battery to the phone and press down the lock until it is locked.
Take out the battery
Switch off the phone, push up the lock at the bottom of the battery to uplift the top of the battery
and separate with the main board.