Biostar H61MLC2 Manual page 11

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
Note:
If the DIMM does not go in smoothly, do not force it. Pull it all the way out
and try again.
B. Memory Capacity
DIMM Socket
Location
DDR3_A1
DDR3_B1
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
Disabled
Disabled
Enabled
(O means memory installed; X, not installed.)
The DRAM bus width of the memory module must be the same(x8 or
x16)
H61M HV/ H61M GV/ H61ML C 2
DDR3 Module
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
DDR3_A1
O
X
O
Total Memory
Size
Max is 16GB.
DDR3_B1
X
O
O
9