Logging
S e n d d o c u m e n t c o m m e n t s t o n e x u s 5 k - d o c f e e d b a c k @ c i s c o . c o m .
Check to see if the destination syslog server is accessible from VRF management. Use the ping
•
<dest-ip> vrf management command to ping the server.
•
Check that the syslog configuration on the DUT has use-vrf management.
Example:
logging server 10.193.12.1 5 use-vrf management
Check that the appropriate logging level is enabled to send logging messages. Use the show logging
•
info command. If the logging level is not appropriate, then set the appropriate level using the
logging level <feature> <log-level> command.
Cisco Nexus 5000 Series Troubleshooting Guide
1-4
Chapter 1
Troubleshooting System Management Issues
OL-25300-01