ProForm 665 E PFTL56507.0 User Manual page 11

12. Attach the Right Handrail (90) to the Right
Upright (78) with three 5/16" x 1" Bolts (7) and
three 5/16" Star Washers (10). Repeat on the
left side (not shown). Start all six Bolts before
tightening them.
See steps 4 and 6. Tighten the 3/8" x 4" Bolts
(6).
13. If necessary, press the Left Tray (92) and the
Right Tray (93) into the Console Back (91).
Tighten a 1/2" Screw (1) into the Left Handrail
Spacer (96) and Right Handrail Spacer (97).
14. Identify the Storage Latch (53). Remove the tie
from the end of the tube. Make sure that the
sleeve has been slid over the indicated hole and
that the Latch Knob (54) is locked into the hole.
Pull on the sleeve to make sure that it is
locked into place.
12
Console Assembly
90
7
10
78
13
91
96 1
14
Tube
Sleeve
11
7
10
92
1
54
Hole
53
93
97