Click Add to enter the following screen:
Here you can create a filter to identify the MAC layer frames by specifying at least one condition below. If multiple
conditions are specified, all of them take effect. Click Save/Apply to save and activate the filter.
Protocol Type: Select a protocol type from the drop-down list.
Destination MAC Address: Enter the destination MAC address to which the MAC filtering rule apply.
Source MAC Address: Enter the source MAC address to which the MAC filtering rule apply.
Frame Direction: Select a frame direction from the drop-down list.
WAN Interfaces: Select a WAN interface from the drop-down list.
4.2.6 Parental Control
This section explains the following information:
•
Time Restriction
•
URL Filter
Time Restriction
Here you can add time of day restriction that an attached LAN device can access the Internet.
Click Parental Control > Time Restriction > Add to enter the following screen.
Wireless N300 ADSL2+ High Power Modem Router
98