Turning On The Phone - Sony Ericsson C902c Cyber-shot User Manual

Table of Contents

Advertisement

Turning on the phone

To turn on the phone
1
Press and hold down
2
Enter your SIM card PIN, if requested
and select OK.
3
Select a language.
4
Select
Yes
to use the setup wizard.
If you want to correct a mistake when
you enter your PIN, press
Before turning the phone off, you must
return to standby.
SIM card
The SIM (Subscriber Identity Module)
card, which you get from your network
operator, contains information about
your subscription. Always turn off your
phone and detach the charger before
you insert or remove the SIM card.
You can save contacts on the SIM card
before you remove it from your phone.
See To copy names and numbers to the
SIM card on page 31.
PIN
You may need a PIN (Personal
Identification Number) to activate the
services in your phone. Your PIN is
supplied by your network operator.
Each PIN digit appears as *, unless it
starts with emergency number digits,
for example, 112 or 911. You can see
and call an emergency number without
entering a PIN.
.
If you enter the wrong PIN three times in
a row, the SIM card is blocked. See SIM
card lock on page 67.
Startup screen
The startup screen appears when you
.
turn your phone on. See Using pictures
on page 27.
Standby
After you have turned your phone on
and entered your PIN, the name of the
network operator appears. This view is
called standby.
Getting started
7

Advertisement

Table of Contents
loading

Table of Contents