Audio Channel List - SOYO 3278AB Owner's Manual

Menu operation
2. PIP source selection
Press PIP key on the remote control first, then press INPUT key on the remote control to enter
Select PIP Source submenu. There are eight options for you to select: ANTENNA, CABLE,
COMPOSITE, S-VIDEO, COMPONENT1, COMPONENT2, PC VGA and HDMI.
Use p q / arrow key to move the cursor to the source you desired and
press OK key to confirm.
Notes: 1. If the source can't be selected in current status, the source will
be displayed in gray.
2. Only when you select Antenna + Cable in Auto Search submenu,
Cable option will be displayed in this menu.
3. PIP function please refer to Appendix 2.

Audio Channel List

Press LIST AUDIO key on the remote control to display the Audio
Channels List, use p q / key to move the cursor to the audio type
you desired and press OK key to confirm.
Audio Type List
The following table lists the alternative audio modes and the default
setting of every audio mode, you can select the audio mode you
desired with the SAP/MTS key on the remote control.
Input signal
Stereo + SAP
Stereo
SAP
Mono
Digital programs including
multiple audio channels
Digital programs only with
one audio channel.
13
Options Default
Stereo/SAP/Mono Stereo
Stereo
Stereo/Mono
SAP/Mono Mono
Mono Mono
Audio1, Audio 2,... Need to memory separately
Only 1 Audio
Select PIP Source
ANTENNA
COMPOSITE
S_VIDEO
COMPONENT1
COMPONENT2
PC VGA
HDMI
Up/Down: Move Cursor,
OK: Change MAIN Source
Audio Channels List
Up/Down: Move Cursor,
OK: Change MAIN Source
Analog Audio Mode
Mono