Operating Psk - Icom IC-7610 Advanced Manual

2. ADVANCED OPERATIONS
Operating PSK (Continued)
D Transmitting a PSK memory content
You can transmit the preset characters on the PSK
MEMORY screen.
L You can edit the characters by touching [EDIT] on the
PSK MEMORY screen.
1. Display the PSK DECODE screen in the PSK
mode.
» DECODE
MENU
L The PSK mode screen slightly differs from the
RTTY mode.
2. Touch [TX MEM].
3. Touch an PSK memory between [PT1] and [PT8]
to transmit.
(Example: PT1)
Lights red
Transmitting contents are displayed.
• The TX status indicator lights red and the Po meter
swings.
L To cancel the transmission and to return to the PSK
DECODE screen, push
LAfter transmitting, automatically returns to receive.
.
EXIT
Memory Title
MYCALLx2 ↵DE Icom Icom K↵
PT1
MYCALLx3 ↵DE Icom Icom Icom K↵
PT2
QSLUR599 ↵QSL UR 599 599 BK↵
PT3
PT4 DE+UR599
PT5 73 GL SK
PT6 CQ CQ CQ
RIG&ANT
PT7
PT8 EQUIP.
When a keyboard is connected:
• You can transmit the preset contents in the PSK
memory (PT1 ~ PT8) by pushing [F1] ~ [F8] on the
USB keyboard.
After transmitting the preset contents, you can
directly enter a PSK message on the keyboard,
and then push [F12] to transmit.
To return to receive, push [F12] again.
• If the Auto TX/RX function is set to "OFF" or
"AUTO RX" (p. 28), you can display the preset
contents on the PSK DECODE screen, and then
transmit it by pushing [F12] on the keyboard.
• You can transmit the preset contents in the PSK
memory (PT1 ~ PT8) from an external device by
setting the "External Keypad," and then connecting
an external keypad to [MIC] or [EXT KEYPAD] on
the IC-7610.
» SET > Connectors > External Keypad
MENU
27
Preset characters by default
↵QSL DE Icom Icom UR 599 599
BK↵
↵73 GL SK↵
↵CQ CQ CQ DE Icom Icom Icom
K↵
↵My transceiver is IC-7610 &
Antenna is a 3-element triband
yagi.↵
↵My PSK equipment is internal
modulator & demodulator of the
IC-7610.↵