Brother RH-9820 Service Manual page 203

12. Route the tubes as shown in the illustration, and then connect the air hose (9) to the joint (4) and the air hose (10) to the joint
(5).
13. Secure the air hoses (9) and (10) in four places using the four bead bands (17) as shown in the illustration.
1172B
14. Loosen the socket bolt (18), and then remove the sub clamp wrist (19).
15. Remove the spring (20).
16. Remove retaining ring C (21), and then remove the sub clamp arm (22).
17. Remove retaining ring C (23), loosen the two set screws (24), and then remove clamp support shaft J (25) in the direction of
the arrow.
(Top)
RH-9820
7. ADJUSTMENTS
Work clamp plate R assembly
(Viewed from the underside)
(Continued on next page)
1171B
194