Operation Instructions - AOC E2795VH Service

3. Operation Instructions

3.1 General Instructions
Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor.
By changing these settings, the picture can be adjusted to your personal preferences.
3.2 Control Buttons
Power
Press the Power button to turn 0n/off the monitor.
Volume/-
When there is no OSD. Press Volume - to active volume adjustment bar. Press - or + to adjust volume.
4:3 or wide image ratio / +
When there is no OSD, press hotkey continuously to change 4:3 or wide image ratio. (If the product screen size is
4:3 or input signal resolution is wide format, the hot key is disable to adjust.).
Auto / Exit
When the OSD is closed, press Auto button will be auto configure hot key function.
Source hot key
When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously to
select the input source showed in the message bar , press Menu/Enter button to change to the source selected.
6