Table of Contents
Advertisement
Entering text
3. Enter the word you want to add using ABC mode; see
page 34.
4. Press the OK soft key.
The word is added to the T9 dictionary and becomes
the first word for the associated keypress series.
Note: This feature may not be available for some
languages.
• To enter periods, hyphens, or apostrophes, press the
1 key. T9 mode applies grammar rules to choose the
correct punctuation.
• To shift case in T9 mode, use the
cases: Initial capital (
), Capital lock (
Lower case (No indicator).
• You can move the cursor by pressing the Left or Right
key. To delete letters, press the C key. Press and hold
the C key to clear the entire display.
Using Number mode
Use Number mode to enter numbers. Press the keys
corresponding to the digits you want to enter.
Using Symbolic mode
Use Symbolic mode to insert symbols.
To
Press the
select a symbol
corresponding number key.
display more symbols
Up or Down key.
clear the symbol(s)
C key.
insert the symbol(s) into
OK soft key.
your message
36
key. There are 3
), and
Options during a call
You can access a number of control functions that you
can use during a call.
Putting a call on hold
You can place the current call on hold whenever you
want. You can make another call while you have a call in
progress if your network supports this service.
To place a call on hold, simply press the Hold soft key.
You can reactivate the call whenever you want, by
pressing the Retrieve soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial, or look
it up in Phonebook.
For details about searching for a number in
Phonebook, see page 55.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or,
1. Put the current call on hold by pressing the Hold soft
key.
2. Make the second call in the normal way.
When you have an active call and a call on hold, you may
switch between the 2 calls, changing the one on hold to
active and placing the other on hold.
To switch between the 2 calls, simply press the Swap
soft key.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with
that person.
When you want to finish, end each call normally by
pressing the
key.
37
Advertisement
Table of Contents
