6-4. Operation of the presser foot 2-stage lifting device
To operate the Presser Foot 2-Stage Lifting Device, use the Function Code 2 (FUN2) in the
process of pattern input.
<Example>
An example of operations to add function code 2 using the operation panel is explained below.
This section describes the methods for input the code data with the input mode when newly
creating a pattern, Please refer to the technical data "Operation Panel Section" enclosed with the
operation panel for details.
(1) Press the
(2) Press the
screen.
(3) Input the dry feed data and stitching data, etc.,
and press
at the position where the
"presser foot two-step changeover unit" is to be
activated (the position where the FUN2 code is
to be input).
on the standard screen.
and open the Input Mode
- 14 -