Getting Started - Focusrite Clarett 2Pre USB User Manual

GETTING STARTED

IMPORTANT: Please ensure that you install the Clarett 2Pre USB drivers before
Software Installation
All software required by the Clarett 2Pre USB, including several powerful and useful extras, is
available for download from the Focusrite website (www.focusrite.com/register). The Important
Information provided with your Clarett 2Pre USB contains validation codes which you will need to
enter at the above web address. This procedure ensures that you will have the most up-to-date
software versions
1. Go to www.focusrite.com/register/.
2. Follow the on-screen instructions, entering the Bundle Code into the form where prompted. Your
Bundle Code can be found on the Important Information packed with the unit.
3. You will then be able to access the "My Products" page, where the software products to which your
registration entitles you are available for download, complete with activation codes where applicable.
Windows users only:
4. Download and install Focusrite Control, which will install the Clarett 2Pre USB's drivers.
Follow all on-screen instructions.
5. When the installation is complete, you will be prompted to restart your computer.
6. After restart, connect the Clarett 2Pre USB to your computer with a USB cable.
7. If you are having trouble getting started please watch our video guide here -
www.focusrite.com/get-started/clarett-2preUSB
connecting the interface to your computer.
6