Vaillant ecoCRAFT exclusive VKK GB 1206/3-E R1 Installation And Maintenance Instructions Manual page 32

Appendix
Code Parameter
D.09 Target flow temperature in °C from
the external continuous controller to
terminal 7-8-9/eBUS
D.10 Heating pump status
D.11 Status of additional external heating
pump
D.12 Status of cylinder charge pump
D.13 Status of circulation pump
D.14 Setting for speed-controlled heating
pump
D.15 Current pump output for the speed-
controlled heating pump in %
D.17 Control type
D.18 Pump operating mode (overrun)
D.20 Max. setting for cylinder target value
D.22 External cylinder charging, plug C1-
C2
D.23 Summer/winter mode (heating off/on)
D.24 Differential pressure sensor
D.25 Cylinder charging/warm start enabled
by warm start clock control/timer:
D.26 Internal accessory relay at X6 (pink
plug)
D.27 Switching accessory relay 1 for
accessory "2-in-7" multi-functional
module
D.28 Switching accessory relay 2 for
accessory "2-in-7" multi-functional
module
D.30 Control signal for gas valves
D.33 Fan speed target value
D.34 Fan speed actual value
D.40 Flow temperature
D.41 Return temperature
32
Values or explanations
Minimum from the external eBUS target value and target
value for terminal 7
0 = Off
1 = On
0 = Off
1-100 = On
Connection via the 2 in 7 multi-functional module
0 = Off
1-100 = On
0 = Off
1-100 = On
Connection via the 2 in 7 multi-functional module
Adjustment range: - = auto, 20 ... 100% fixed value set-
ting
0 = Flow temperature control
1 = Return temperature control
1 = Overrun (comfort)
3 = Continuous (eco)
Adjustment range: 50 - 70 °C
1 = on, 0 = off
0 = Heating off (Summer mode)
1 = Heating on
0 = Contact open, 1 = Contact closed
1 = Yes, 0 = No
1 = Circulation pump
2 = Second external pump
3 = Cylinder charging pump
4 = Flue non-return flap/extractor hood
5 = External gas valve
6 = External fault message
1 = Circulation pump
2 = Second external pump
3 = Cylinder charging pump
4 = Flue non-return flap/extractor hood
5 = External gas valve
6 = External fault message
1 = Circulation pump
2 = Second external pump
3 = Cylinder charging pump
4 = Flue non-return flap/extractor hood
5 = External gas valve
6 = External fault message
0 = Off; 1 = On
in rpm/10
in rpm/10
Actual value in °C
Actual value in °C
Installation and maintenance instructions ecoCRAFT exclusive 0020149561_01
Default set-
Own setting
ting
Not
adjustable
Not
adjustable
Not
adjustable
Not
adjustable
Not
adjustable
–
0
1
65 ℃
Not
adjustable
1
1
1
2
Not
adjustable
Not
adjustable
Not
adjustable
Not
adjustable
Not
adjustable