Easy Pairing - LG BLUETOOTH HBS-250 User Manual

How to use
Power off
- Press and hold the PWR/CALL button for at least 5 seconds.
� A tone will play, the Bluetooth link will disconnect, and the HBS-250
will turn off.

Easy Pairing

- With the HBS-250 off, Press and hold the PWR/CALL button for 2 seconds.
� If the HBS-250 has never been connected with a Bluetooth device,
it will automatically enter pairing mode.
� If the HBS-250 has previously been connected with the Handset,
it will automatically try to reconnect to that handset.
� If the HBS-250 fails to reconnect to the handset, it will automatically
enter pairing mode.
� You will hear two short beeps and the LED indicator will shows a solid
blue light, when the device enters Pairing Mode.
� Once in Pairing Mode, please follow these instructions:
Using your Handset, find the Bluetooth Menu and "search for" or
▶
"add" new devices.
Select "LG HBS-250" from the list of devices and pair it with your handset.
▶
When asked for the Pass/PIN code during the pairing procedure,
▶
please enter "0000" (4 zeros).
After pairing successfully, be sure to "Connect" to the HBS-250.
▶
Once you have connected successfully, you will hear a beep.
▶
If you want to pair with other devices in the future, the HBS-250
▶
must be placed into Pairing Mode.
If the HBS-250 is in "Pairing Mode" for 3 minutes without being
▶
paired to a device, the Headset will automatically turn off.
Pairing (Manual)
- Prior to using the Headset for the first time, you must pair it with a
Bluetooth-enabled handset.
- With the HBS-250 off, press and hold the PWR/CALL button for 5
seconds.
�You will hear two short beeps and the LED indicator will shows a
solid blue light, when the device enters Pairing Mode.
�Once in Pairing Mode, please follow above instructions.
6
Connecting (Previously Paired)
There are two ways to connect the "HBS-250" to a Handset.
1. Connecting from a Handset to the HBS-250
� From the Bluetooth menu, select the "connect" sub-menu.
� Select "LG HBS-250" and connect.
2. Connecting from the HBS-250 to a Handset
� Press the PWR/CALL button for 2 seconds to power on.
� If the "HBS-250" has ever been previously paired with the Bluetooth
device successfully, it will automatically reconnect to that device.
[ Auto Reconnect ]
- When the HBS-250 is turned off while connected, the headset and
handset will disconnect. The Stereo headset and handset will
automatically reconnect without pairing, when the HBS-250 is turned
back on.
[ Out of range ]
- When the HBS-250 and your handset are separated by a distance of
33 feet (10meters) or more, the HBS-250 and handset will disconnect.
When the handset and HBS-250 are brought back within the required
distance, the HBS-250 and handset will automatically reconnect.
- If the HBS-250 and handset do not automatically reconnect when
they are back within the required range, briefly press the PWR/CALL
button on the HBS-250 to reconnect manually.
Multi-connection
You can connect your HBS-250 to two devices in order to enable
music playing and phone connectivity at the same time. This implies
that your mobile phone will be paired with the headset or hands-free
profile and your Bluetooth-enabled audio device will be paired with
A2DP and AVRCP.
1. Connect your HBS-250 to a Bluetooth-enabled audio device.
2. Power off the HBS-250 by pressing PWR/CALL button for 5 seconds.
(The connection with the audio device will subsequently drop.)
3. Put your HBS-250 in the pairing mode and pair/connect the headset
to a mobile phone by using the headset or hands-free profile.
4. Press MUSIC JOG dial once briefly.
5. The audio device is now paired with A2DP and AVRCP, while the
mobile phone is paired with the headset or hands-free profile.
* Note: In case your mobile phone supports A2DP and AVRCP, you can
enjoy listening to music from your mobile phone with the HBS-250.
How to use
7