6.1 Requirement
• PC (486 type or higher) with Microsoft "Windows" Operating System
• One COM-port free for usage
• The Data Transfer Jig (unit: p/n 1-792-172-11)
PREPARATION FOR SOFTWARE UPDATE
6.2 Hardware set-up
• Copy all the files to the PC (define own directory).
• Connect the Data Transfer Jig to the PC COM-port (COM 1 or COM 2) and the CMD-MZ5 external connector.
• Attach battery pack to CMD-MZ5; the CMD-MZ5 is powered up from the battery pack.
• The initial settings of the flash.exe program may not correspond with the normally correct settings. It is highly
advisable to check the settings first (see 6.3 Software set-up).
6.3 Software set-up
6.3.1 ∗ Download Software to Mobile (Software Update)
• Start the program flash.exe by double-clicking on its icon in the Windows Explorer.
• Check if the settings for the "Com Port", "Speed" and "Load Option" are correct.
Com Port :
Baud Rate :
Load Option :
SECTION 6
PROGRAMMING INSTRUCTIONS
DATA
TRANSFER
JIG
COM 1
115200
DOWNLOAD TO MOBILE
22
MZ5 Flash.exe