D-Link DIR-615 User Manual page 42

Wireless

Hide thumbs Also See for DIR-615:

This window allows you to change the behavior of the 802.11g wireless radio from the standard settings. Please be aware that any changes

to the factory default settings may adversely affect the behavior of your network.

Set the transmit power of the antennas.

Beacons are packets sent by an Access Point to synchronize

a wireless network. Specify a value. 100 is the default

setting and is recommended.

This value should remain at its default setting of 2346. If

should be made.

determines whether packets will be fragmented. Packets

transmission. 2346 is the default setting.

listening to broadcast and multicast messages.

technique for detecting data transmission errors) for communication between the wireless router and the roaming wireless

CTS (Clear To Send) is a function used to minimize collisions among wireless devices on a wireless local area network (LAN).

CTS will make sure the wireless network is clear before a wireless client attempts to send wireless data. Enabling CTS will

add overhead and may lower wireless through put.

CTS will always be used to make sure the wireless LAN is clear before sending data.

the wireless network.

D-Link DIR-615 User Manual

CTS is typically used in a pure 802.11g environment. If CTS is

CTS will monitor the wireless