Siemens S2588 Service Manual page 89

Hide thumbs Also See for S2588:
Table of Contents

Advertisement

14.09.99
S25-gb.fm
Sending Data or Fax
• Align the IrDA window of the phone
and PC (max. 30 cm apart). Ensure
that IrDA is activated in your PC and
phone.
or
• Connect the data cable.
Start your communications program,
and enter "Send" or equivalent. For
first use, you will need to select the
modem you have installed (PC settings
see p. 48). You will then need to enter
the required destination.
F
indicates that communica-
tion is under way.
Ending Transmission
Your PC should be used terminate the
call, if necessary:

May be used, but note risks
of interrupting a PC pro-
gram.
Receiving Data/Fax calls
You will be alerted by a special tone.
,QFRPLQJ'DWD
'LYHUW
Ensure that your IrDA window is cor-
rectly aligned (or Data Cable con-
nected) see 'Sending' above.
In most cases your communications
program needs to be started to answer
and receive the data/fax call.
F
indicates that IrDA commu-
nication is under way.
S25,
englisch,
Using Data and Fax
B
A31008-H3100-A1-3-7619
Info
You may set 'Divert All Data - or Fax'
to a convenient PC if you do not have a
PC with you (see p. 40).
Your PC software may offer additional
communication functions for your
phone, eg write SMS messages or
manage the PhoneBook.
For optimum use, load the SoftData-
Link PRO software (see p. 58). This
also enables many other facilities to
enhance communication, time man-
agement and usability.
6HWXS
Please see
(see p. 45) to check
Link up, or set for special Data and Fax
services.
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

S25

Table of Contents