Important Safety Information - Sonos PLAY:1 Product Manual

12
Indicator Lights
Solid green Volume set to zero or muted
Flashing orange During SonosNet setup, this
occurs after a button press
while the product is
searching for a household to
join.
Rapidly flashing Playback / Next Track failed
orange
Solid orange During wireless setup, this
occurs while the Sonos open
access point is temporarily
active.
If you are not setting up
Sonos, this may indicate
warning mode.

Important Safety Information

Warning: Do not open Sonos products as there is a risk of electric shock. Under
no circumstances should Sonos products be repaired by anyone other than an
authorized Sonos repair center, as this will invalidate the warranty. Please contact
Sonos Customer Support for more information.
Read these instructions.
1.
Keep these instructions.
2.
Player State Sonos Product
CONNECT,
CONNECT:AMP,
PLAY:1, PLAY:3,
PLAY:5,
PLAYBAR
BRIDGE, BOOST,
CONNECT, SUB,
CONNECT:AMP,
DOCK, PLAY:1,
PLAY:3, PLAY:5,
PLAYBAR
CONNECT, Indicates either playback or next track
CONNECT:AMP, was not possible
PLAY:1, PLAY:3,
PLAY:5,
PLAYBAR
CONNECT, SUB, If the orange light is on AND the player's
CONNECT:AMP, volume level automatically reduces, this
PLAY:1, PLAY:3, indicates the player is in warning mode.
PLAY:5,
PLAYBAR
Additional Information
•
Press the Pause button to stop the
audio
•
For Sonos products with a vent
opening (SUB, CONNECT:AMP),
check to make sure it's not blocked
•
Check the room temperature to make
sure it's less than 104°F/ 40° C
•
If the player is in direct sunlight,
provide shade
•
Allow the player to cool for several
minutes and then press Play to restart
the audio
•
If the problem does not resolve,
please contact Customer Support
Product Guide