Disassembling - Samsung SMT-R2000 User Manual

CHAPTER 12. Assembly and Disassembly

2.2 Disassembling

This section describes how to disassemble SMT-R2000.
The main body of SMT-R2000 is disassembled according to the following order:
1) Separating the Stand from the Main Body
Separate the stand from the SMT-R2000 main body.
Push off the SMT-R2000 main body and the stand in opposite directions each other,
and then the stand is separated from the main body as shown in the figure below:
2) Separating the Case
Remove four screws from the bottom of the main body:
2-2
Figure 2.2 Separating the Stand
Figure 2.3 Removing Case Screws
© SAMSUNG Electronics Co., Ltd.