Sub Menu; Password Change - Avermedia EB1004 Operation Manual

3.7.1 PASSWORD CHANGE

To change the password:
1. Input the prompted information:
The factory default password is "111111". Use the following front panel buttons
to input a numeric password:
For "1"
2. The "Password changed" message is then displayed. This message flashes
three times, and then you will be returned to the SUB MENU.
Note: You will be prompted to enter the password when you attempt to format the
hard drive(s) in the HARD DRIVE SETUP menu.

SUB MENU

> PASSWORD CHANGE
TIME SET
VGA SETUP
MOTION SETUP
PASSWORD SETUP
PRESS (< , >), THEN(SELECT)
PRESS (MENU) TO EXIT
CURRENT PASSWORD :
NEW PASSWORD :
CONFIRM PASSWORD :
For "2"
21
NO
- - - - - -
- - - - - -
- - - - - -
For "3" For "4"