Table of Contents
Advertisement
2.press numberic keys to input numbers.
To enter uppercase or lowercase letters
1.press # several times until abc is displayed at the top-right corner of the screen, then you
can input lowercased letters.
2.press # several times until ABC is displayed at the top-right corner of the screen, then
you can input uppercased letters.
3.press alphanumeric key several times(no longer than 0.5 seconds between each two pressing)
to enter a specified letter written in the key.
4.if the cursor is hidden, you can keep on pressing to change current character. current character
will be entered when the cursor appears.
5.if you want to enter a letter which in the same key, you must wait for 0.5 seconds until the cursor
appears, so you can press the key again. If you want to enter a letter which in a different key, you
need not wait for the cursor, and can press the key as you want directly.
To enter symbols or special characters
1.press * .
2. Use up and down to select the symbol you need.
21
Advertisement
Table of Contents
