National Electronics & Watch M13-963 User Manual

National Electronics & Watch Co, Ltd.
User Guide
(M13-963SW123)
Bluetooth Smart Gear device
Introduction
Thank you for purchasing the Bluetooth (BLE 4.0) Fit Band OLED display. This product can record
your Exercise time, Calorie, Distance, Pace; Speed, Steps and Sleep that will track your total
sleep time, light sleep, deep sleep, wake-up time and target % sleep. It also monitors the weather
and the temperature. It also has a vibration function when there is an incoming call or message.
The product has two (2) buttons on the sides of the screen.
Note that the actual color and artwork may vary from style to style.
How to pair your Smart Gear device with smart phone:
•
Press and hold the S1 or S2 button of the Smart Gear device from OFF screen. Or press and
hold S1 button from ON screen (any view). The Bluetooth
followed with SYNC and status bar scrolling.
While the "SYNC" appears in the Smart Gear device, tap the smart phone App to sync.
Notes:
If pairing is successful, the "
will show "PHONE CONNECTED".
icon and SYNC will flash
OK
" and Bluetooth icon appears. After 2-3 seconds, it
If pairing is unsuccessful, after 1 minute, the "
In any mode, press and hold S1 button to turn off the Bluetooth. It will then display
"BLE OFF".
•
Open the Apps by tapping the Smart Gear icon on the Smartphone. The Welcome Smart
Gear screen appears and continue tap as highlighted in red as shown.
• Continue tap the icon highlighted in red of the screen as shown.
User can select the various screens such as, HOME, ACTIVITY, SLEEP and EXERCISE.
X
" and Bluetooth icon appears.