4.
Ensure that the two ends of the leads are connected using the white
connector.
5.
Once the leads are correctly connected the user screen will show the vehicle
connected (see Figures 1/2). When the vehicle is first connected, the Solo is
likely to start charging the vehicle battery unless it is fully charged.
Using the Solo
The user screen on top of the Solo is the main interface that informs showroom
staff of the status of the unit. The buttons can be used to retrieve further
information and to control the unit including:
Status information
The information screen will show:
The status of the Power Packs
•
Whether the unit is connected correctly
•
Whether the vehicle battery is being charged
•
The status of the vehicle battery
•
The status of the 2 USB charging ports
•
Controlling the unit
The buttons can be used to:
Put the unit in standby
•
Turn the USB charging ports on and off
•
Using the Information Screens
INDEPENDENT SHOWROOM VEHICLE BATTERY SUPPORT
Solo User Manual
7