Zte ZMAX Start Manual page 20

3. Edit the Network SSID field and then
create a new Network SSID name.
4. Touch Frequency band field to select
the frequency.
5. Touch Channel field to select the
channel.
6. Verify the Security field is set to WPA2
PSK.
7. Enter a new password then write it
down.
8. Enable the Broadcast network
name(SSID) field if you would like to
broadcast your SSID name to nearby
devices.
9. Touch Save to store the new settings.
10. Confirm the Mobile HotSpot active icon
appears at the top of the screen.
NOTE: By default, during the initial setup
process, the connection is not secure.
It is recommended that you maintain a
secure connection by using a password for
communication.
19