Led Indicators - D-Link DIS-200G-12S Quick Installation Manual

Before You Begin
This Quick Installation Guide gives you step-by-
step instructions for setting up the DIS-200G Series
Layer 2 Gigabit Industrial Smart Managed Switch.
The model you have purchased may appear slightly
different from the one shown in the illustrations. For
more detailed information about the switch, please
refer to the user manual.
Package Contents
This package should include the following items:
• DIS-200G Series switch
• DIN rail mounting kit
• Wall mounting kit
• User guide CD
• Quick Installation Guide
• Console cable
If any of the above items are damaged or missing,
please contact your local D-Link reseller.
Hardware Overview

LED Indicators

2
Figure 1
All Switches
#
1
2
3
4
5
6
DIS-200G-12PS/PSW
1
3, 4, 5
6
LED Status
Solid The DIS-200G is on and accepting web
green connections.
Blinking A firmware update is in progress.
green
SYS
Solid The DIS-200G is not ready for
amber communication.
The DIS-200G is booting up or PoE has
Blinking
failed during system operation (DIS-200G-
amber
12PS/PSW models only).
Solid The power supply to the DIS-200G has
ALM
amber failed.
Solid Power source 1 is connected.
PWR 1
green
Solid Power source 2 is connected.
PWR 2
green
Solid Power source 3 is connected.
PWR 3
green
Solid Port is connected at 1 Gbps.
green
Ports
11 - 12
Blinking There is activity on the port at 1 Gbps.
green
Table 1
1
2, 3
2
Figure 2
Description
1