Using The Thermometer - Fluke 51 User Manual

Using the Thermometer

1. Plug the thermocouple(s) into the input connector(s).
2. Press  to turn on the thermometer.
After 1 second the thermometer displays the first reading.
If no thermocouple is plugged into the selected input or the
thermocouple is "open," the display shows "- - - -"
Changing Setup Options
Use Setup to change the thermocouple type, offset, sleep
mode, and line frequency settings.
The thermometer stores the settings in its memory. Setup
settings reset only when the batteries are removed for
more than 2 minutes.
Shop for Fluke products online at:
info@Fluke-Direct.com
Entering or Exiting Setup
When the thermometer is in Setup mode, the display
shows .
•
Press
Setup Options
Option
Thermocouple
Type
Offset
Sleep Mode
Line Frequency
MyFlukeStore
Fluke-Direct
www.
51 & 52 Series II
Using the Thermometer
 to start or exit Setup.
Menu
Settings
Item
TYPE J, K, T, or E
 T1 or T2 (Model 52)
 (sleep mode on) or

 (sleep mode off)
50 H (50 Hz) or
 
60 H (60 Hz)
1.877.766.5412
.com
.com
1.888.475.5235
9