Palm Treo XXX User Manual page 26

Table of Contents

Advertisement

1
S E T T I N G U P
Delete any third-party applications
that you no longer use.
Move large files, such as eBooks and
images, to an expansion card.
Move third-party applications to an
expansion card.
Purge old info in applications such as
Calendar (Date Book), Tasks (To Do),
and email. Refer to the
documentation that came with your
previous device for instructions on
these items.
3 Synchronize your previous device with
your previous desktop software to back
up your information one last time.
4 Install the desktop synchronization
software from your new Palm Software
Installation CD (see Installing the
desktop synchronization software).
5 During the installation process, sync
your Treo XXX with your new desktop
software as instructed. When
prompted, do the following:
Connect your Treo XXX to your
computer (see Connecting your
Treo XXX to your computer).
20
S E T T I N G U P Y O U R C O M P U T E R F O R S Y N C H R O N I Z A T I O N
Indicate that you want to sync only
the info in your PIM apps (Calendar,
Contacts, Memos, and Tasks). This is
strongly recommended to ensure an
optimal upgrade experience. Or
indicate that you want to sync all info
and apps (excluding apps known to be
incompatible).
Select a device name for your
Treo XXX; be sure to select the same
name that you used for your old
device. (To locate this name, select
the HotSync application on your old
Palm device. The device name
appears in the upper-right corner of
the screen.)
6
If you have pictures on
MAC ONLY
your previous device, copy them from
your previous device to an expansion
card or beam them to your Treo XXX.
7 If you plan to continue using your
previous device, perform a hard reset
on your previous device to remove its
associated device name. (See the
documentation that came with your
previous device for instructions on
performing a hard reset.) Each device
you synchronize with your computer

Advertisement

Table of Contents
loading

Table of Contents