*1
The corresponding models are
subject to change without notice.
Setup overview
1
Initial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2
Insert the battery
The battery will supply power to
the connected device in the event
of a power failure.
3
Connections
Connect the backup battery to the
power outlet and to the device it
will supply power to.
4
Registration
Required only if the backup battery
was purchased separately (i.e.,
not as part of a bundle).
5
Confirm the usage area
Read the information in this
document to confirm that the
desired usage area is suitable to
proper operation.
For assistance, please visit www.panasonic.com/support
Shinsei_HNP100_(en_us)_0420_ver.000.pdf
Inserting the battery
R USE ONLY the specified battery.
R Wipe the battery ends (
a dry cloth.
R Avoid touching the battery ends (
1
2
3
4
Connections
1
1
9
) or the unit contacts.
Press the notch on the battery
cover firmly.
Slide it in the direction of the arrow.
Insert the battery.
Close the battery cover.
2
3
Insert the power supply plug firmly
into the DC jack of the compatible
device.
Connect the AC adaptor plug to
the backup battery.
Setup
,
) with
,
4
9
2015/04/20
11:39:45