Electrical Connection; Before Each Connection Check If; Removing And Installing The Doors - Haier HRF-522IS6 User Manual

GB

10.9 Electrical connection

Before each connection check if:

▶ power supply, socket and fusing are appropriate to the rating plate.
▶ the power socket is earthed and no multi-plug or extension.
▶ the power plug and socket are strictly according.
Connect the plug to a properly installed household socket.
WARNING!
To avoid risks a damaged power cord must be replaced by the customer service (see
warranty card).

10.10 Removing and installing the doors

In the event that you need to remove the appliance doors, please follow the door removal
and installation instructions below (Fig. 10.10).
WARNING!
▶ Before any operation, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶ Block the water supply.
▶ The appliance is heavy. Always handle with at least two persons.
▶ Do not tilt the appliance more than 45° or place it horizontally on the ground
1. Release the water coupler on the upper left corner
at the back of appliance: press and hold in the col-
lar as shown and remove the water.
2. Undo the hinge cover screw and remove the
cover. Release the cable connector.
10- Installation
1.
2.
10.10
35