Installation Location; Installation And Maintenance Space; Single Installation Around The Opening - Haier AV08NMSETA Service Manual

Outdoor installation

Installation location

■
Outdoor unit should be placed in well ventilated and dry place.
■
Outdoor noise and exhaust should not affect neighbors and around the ventilation.
■
Ensure the ground steadily reliable.
■
Do not install the outdoor unit on high oil, salt spray or harmful gases.
■
Don't being installed to electromagnetic wave can directly radiate an electricity box and keep off electromagnetic
wave radiation possibly, at least more than 3 meters.
■
When ice snow overlay area installs outdoor unit, please add to defend snow cover.
■
Outdoor unit installed in the shade, avoiding direct sunlight or high temperature heat sources of radiation.
■
Do not install in dusty or polluted place to prevent outdoor unit heat exchanger jam.
■
The outdoor unit should install in the public unapproachable place.

Installation and maintenance space

As shown below, install the outdoor unit should allow sufficient space for handing and maintenance.
Case 1: Stumbling block on the inlet , also upside opens.

Single installation around the opening

Single installation around the opening
Min200mm
Inlet
Outlet
Single installation around the closed
Single installation around the closed
Min300mm
Min150mm
Inlet
Outlet
Min300mm
A
22 22
Min360mm