Introduction To The E600 Manager Interface; Internet Service; Call Service - Huawei E600 Quick Start Manual

Removing the E600
3.
Note: To remove the E600, please use the hardware
deleting function of the Windows system to stop
the operation of the E600 and then pull it out.
Double click on the lower right corner of the
1)
computer screen; the "Safely Remove Hardware"
window will be displayed.
Stop the use of the E600 hardware "NEC PCI to
2)
USB Open Host Controller".
When the system prompts you that it is safe to
3)
remove the device, pull out the E600.

Introduction to the E600 Manager Interface

Entering the E600 Manager Interface
1.
Double click on the desktop to start the E600
Manager. If the system prompts you to input a PIN
(Personal Identity Number), please input a correct one.
2. Shortcut Icons Description
/ : Connecting from/Disconnecting to the
network.
: Opening the default Internet browser in the
operating system.
: Accessing the Call service.
: Accessing the SMS (Short Message Service)
service.
: Accessing the Contacts service.
: Accessing the Call Register service.

Internet Service

1. Network Connection Settings
Creating a New Profile:
Select Settings ––> Network Connection Settings
1)
on the menu bar.
Click <New>.
2)
Enter a new profile name and other parameters.
3)
Click <Save> to save the new profile.
4)
Note: Please contact your network operator to get the
parameters and the values.
2. Accessing the Internet
Click to connect the network.
1)
When the connection is completed, corresponding
2)
information about the connected network will be
displayed on the right side of the window, which
includes:
Having connected time of the current connection;
The data flow volume of the current connection;
The volume, rate and the top rate of the current
sending and received data.
Click to open the Browser.
3)
Click to disconnect the network.
4)

Call Service

Insert an earphone into the earphone jack of the E600
before a call service.
2