Table of Contents
Advertisement
2.1.1
CPU Installation / Replacement
Follow the instructions below to install or replace the CPU if necessary.
1. Take away the fan duct. Then remove the CPU heatsink.
2. Unlock the CPU socket by pressing the lever sideways, then lift up the
lever and the metal lid.
3. Position the CPU above the socket such that the CPU corner aligns with
the gold triangle matching the sockt corner with a small triangle.
4. Carefully insert the CPU into the socket and push down the lever to
secure the CPU.
Then you can install the CPU cooler and fan duct back.
Note: Ensure that the CPU heatsink and the CPU top surface are in total
contact to avoid CPU overheating problem that would cause your
system to hang or be unstable
2.1.2
Network Module Installation / Removal
Release two screws of a network module and pull it out carefully as shown
below for replacement and installation.
FWA9400 User Manual
11
Advertisement
Table of Contents
