ION 1023 Quick Start Manual

Quick Start Guide
Model: #1023,1026,1027
FCC ID: NW71023
Thank you for purchasing the iON Air Pro 2 HD sports video camera.
This QSG contains the common functions and features of Air Pro 2 and Air Pro
2 Wi-Fi. For additional features and functions of Air Pro 2 Wi-Fi, please refer to
the back part of the manual.
The iON Air Pro 2 can be mounted with the Bike & Helmet Kit or the Board Kit for the
ultimate adventure HD recording experience.
Getting to know your camera
Common features:
iON Air Pro 2 is a Professional, High Quality Digital Video Recorder that
records Full HD videos with the flip of an an easy slide switch
It has the latest 14 Mega Pixel Sensor for you to take great digital photographs
A 180 degree high quality lens provides a super wide angle field of view
Your camera supports a MicroSD card up to 32GB, allowing you to take videos
in 1080p with 30 frames per second for approximately 4 Hours.
Equipped with the microphone jack for connection with an external
microphone.*
The Waterproof Housing enables you to operate the camera up to 10 meters
under water.
iON Air Pro 2 is about 4.51 ounces or 128g.
* When an external microphone (not included) is connected, audio cannot be
recorded through the built-in microphone.
1. Package Contents of Air Pro 2
Carefully unpack the package and ensure that you have the following items:
1. Connect the camera to a computer for
1 USB Cable data transfer or camera setup.
2. Charge your camera.
Attach the correct international wall plug
2 Universal Power Adapter to the adapter block and connect to the
camera with the USB cable
For mounting the camera without using
3 Tripod
the camLOCK system
Secures the camera to the mount to
4 Secure Strap
provide additional security.
Tightens and loosens the CamLOCK
5 CamLOCK Key
screw.
1. Short Ball Joint - to be installed into
Short Ball Joint with the Helmet Mount
6
CamLOCK socket on top 2. CamLOCK socket - for attaching the
CamLOCK and the camera
Double Faced Adhesive - Adhere to the helmet mount and/or
7
Helmet helmet.
Enables you to mount the camera on
Helmet Mount with
8 different types of helmets by tightening
removable ball join nut
and loosening the ball joint nut
Mount or remove the camera quickly
9 CamLOCK
from the CamLOCK socket.
Provides quick information for easy
10 Quick User Guide
camera operation
Please retain for manufacturers warranty
11 Warranty Card
period which is limited to 1 year.
12 Pouch For storing your camera or accessories.
Provides guidance on how to sign up for
13 Mi-media Card
your free iON cloud storage.
2. Functional Parts of Air Pro 2
1. Turns the camera on or off
1 Power
2. Takes a single photograph
2 LED Indicator Shows the camera status
3 Recording Slide Switch Slide to start or stop video recording
4 Lens High quality lens
5 MicroSD Card Slot MicroSD card storage location.
To enable you to connect to an external
6 Mic Jack
microphone (not included)
To enable you to connect the camera to an HDTV
7 Mini HDMI Jack
with an HDMI cable (not included)
8 Video Resolution Switch Select video resolution: FHD (Full HD) or HD.
1. Connect to your computer for data transfer or
9 USB Port camera setup
2. Charge your camera
10 Reset Button Reset the camera
Connect the PODZ to the camera to perform
11 PODZ Socket
additional functions
3. Using Your Camera
3.1 Charging up Your Camera
Charge your camera with either the USB cable or AC/DC adapter. The red LED will
light up to indicate the camera is charging and it will turn off once the camera has
been fully charged. It takes about 3 hours to fully charge the camera.
3.2 Inserting a Memory Card
Insert a MicroSD card up to 32GB (not included) before using your camera. Ensure
that the camera power is turned OFF before inserting the card into the slot.
Notes:
1. There is only one correct direction to insert the MicroSD card into the slot. Do
not force the card into the card slot as it may damage both the camera and the
MicroSD card.
2. A new MicroSD card should be formatted before using. For more information,
please see section 4.2.
3. We recommend a class 10 SDHC card.
3.3 Setting up Date and Time
Connect your camera to a computer and run the iON software from the MicroSD
card folder. You can set the date and time on the camera via the settings page.
Please see section 4.1 to open iON software