System Setup - Hitachi HBD316 User Manual

The HOME menu will display on the screen
automatically, under No Disc or Stop situations.
1. Within the HOME menu, you can use LEFT and
RIGHT buttons on the remote control to move the
cursor, and then press the ENTER button to make
your selection.
Press RETURN can return the previous menu.
2. Press HOME button to display the HOME menu.
QUICK SETUP
Within the HOME menu, you can use LEFT and
RIGHT buttons on the remote control to select the
QUICK SETUP, and then press the ENTER button
to open the QUICK SETUP menu.
An initial setup wizard helps to quick set the unit,
such as the OSD language, resolution, and so on.
Note:
The first time you turn on your player, the Quick
Setup wizard opens automatically. You can use the
wizard to select initial settings for your player, such
as the menu language and video resolution.
SETTINGS
Within the HOME menu, you can use LEFT and
RIGHT buttons on the remote control to select the
SETTINGS, and then press the ENTER button to
open the Settings menu.
1. Display
Display TV Aspect Ratio
Audio Resolution
Language TV System
Network HDMI Color Space
System HDMI Deep Color
Security HDMI 1080p 24Hz
Use cursor keys to highlight menu and
RETURN
Enter key to select
1.1 TV Aspect Ratio
Select the Aspect Ratio: 16:9 Normal, 16:9 Full,
4:3 Pan&Scan, 4:3 Letterbox.
16:9 Normal: For a disc with the aspect ration of 4:3,
the output video is resized vertically to match what
will be seen on the display.
16:9 Full: For a disc with the aspect ration of 4:3, the
output video is stretched into 16:9 full screen.
4:3 Pan&Scan: Display a wide picture on the entire
screen and cuts off the redundant portions. Select
when a standard 4:3 TV is connected. The scanning
line is complete, but part of the image is clipped.
4:3 Letterbox: Display a wide picture with two black
borders on the top and bottom of 4:3 screen. Select
when a standard 4:3 TV is connected. The screen is
complete, but due to the lost of scanning line, the
resolution is reduced.
1.2 Resolution
Select the video output resolution: Auto, 1080p,
1080i, 720p, 480p and 480i.
Auto: Select the most suitable resolution according
to the input video.
Note:
Setting the player for an output resolution not
supported by your TV will result in unpredictable
results.
Only the HDMI output of the player is capable
of supporting 1080p video output at any frame rate.
The CVBS will have the image output only in 480i
or 480p, if the CVBS has no video output then can
be used RESOLUTION key for switch, till appear
the normal video.
1.3. TV System
Select TV system: NTSC and PAL .
NTSC: Select this option when connected with
NTSC-TV.
PAL: Select this option when connected with PAL-TV .
1.4 HDMI Color Space
Select HDMI Color Space: Auto, YCbCr, YCbCr422,
Full RGB and RGB.
16:9 Normal
1.5 HDMI Deep Color
Auto
Select HDMI Deep Color: Auto and Off.
NTSC
RGB
Note: HDMI 1.3 supports 10-bit, 12-bit and 16-bit
Off
(RGB or YCbCr) color depths while 8-bit depths in
Off
previous versions. This expands the colors displayed
Exit
HOME
from millions to billions, which is much more vivid
than the previous.
1.6 HDMI 1080p 24Hz
Select HDMI 1080p 24Hz: Auto and Off.
15

SYSTEM SETUP