AEG F45078I-M General Manual page 15

INSTALLATION INSTRUCTIONS EN
CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH
THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON
THE INNER EDGE OF THE DOOR.
IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED
BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE
CENTRE.
THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MALFUNCTION OF
FAULT, THE EARTH REDUCES THE RISK OF ELECTROCUTION BY PROVID-
ING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE, LESS RESISTANT
PATH.
BEFORE MAKING ELECTRICAL CONNECTIONS, DISCONNECT THE MAINS
POWER SUPPLY FROM THE WORK AREA.
CHECK THAT THE MAINS SUPPLY IN THE PLACE OF INSTALLATION COM-
PLIES WITH THE REGULATIONS IN FORCE IN THE COUNTRY OF USE, AND
THAT IT IS CORRECTLY EARTHED.
THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MALFUNCTION OF
FAULT, THE EARTH REDUCES THE RISK OF ELECTROCUTION BY PROVID-
ING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE, LESS RESISTANT
PATH. THIS APPLIANCE IS FITTED WITH A SUPPLY CORD CONTAINING
AN EARTH WIRE AND PLUG. FIT THE PLUG INTO A SUITABLE SOCKET, IN-
STALLED AND EARTHED IN COMPLIANCE WITH THE LAWS IN FORCE IN
THE COUNTRY OF INSTALLATION.
AN INCORRECTLY CONNECTED EARTH WIRE MAY GENERATE THE RISK
OF ELECTROCUTION. IF IN DOUBT AS TO THE CORRECT EARTHING OF
THE APPLIANCE, CALL IN A QUALIFIED ELECTRICIAN OR THE TECHNICAL
ASSISTANCE SERVICE. DO NOT CHANGE THE PLUG ATTACHED TO THE
APPLIANCE. IF THE PLUG IS NOT SUITABLE FOR THE SOCKET, CALL IN A
QUALIFIED ELECTRICIAN TO FIT A SUITABLE PLUG.
15
Rev 0.0