Teamserver Rackmount - Fujitsu teamserver M851i Configuration Manual

Table of Contents

Advertisement

teamserver Rackmount

40U Rack
GP5-R1RC2
A maximum of two servers can be installed in a Rack
system.
teamserver CPU nodes for Rackmount
M800i / L800i / G800i
y
C800i
M800i / L800i / G800i
y
[Inside of Storage System]
NOTE : A maximum of eight Hard Disk Drives can be installed in a Storage System.
System Configuration
Component Shelf GP5-R1TB4
Keyboard/Monitor Extention Cables
GP5-411
SCSI Card
GP5-125
SCSI Card
GP5U121
RAID Card
GP5U141
SCSI Card
GP5-126
RAID Card
GP5-144
Hard Disk Drive-4GB(7,200rpm)
GP5-HDH45
Hard Disk Drive-9GB(7,200rpm)
GP5-HDH93
Hard Disk Drive-9GB(10,000rpm)
GP5-HDH94
Hard Disk Drive-18GB(7,200rpm)
GP5-HDH81
Hard Disk Drive-18GB(10,000rpm)
GP5-HDH82
Redundant Power Supply Unit
GP5UR1PU1
In a RAID configuration, a physical pack must be comprised by the same
type of hand disks.
40U Rack & Rack Coupling kit
GP5-R1RC3
The Rack Coupling kit is used for connecting two Racks
together.
Key board/Monitor
Enhanced Switch
GP5-SB101
SCSI Cable
GP5MU823A
SCSI Cable
GP5MU823A
SCSI Cable
GP5MU830A
SCSI Cable
GP5MU823A
SCSI Cable
GP5S-832
20
Enhanced keyboard
GP5-R1KB2
Keyboard/Monitor Shelf Kit GP5-R1TB3
Storage System
GP5UR1DC2
The number of these cabinets
depends on the configuration.
Storage System(Ultra2 Wide)
GP5UR1DC3
The number of this cabinet
depends on the configuration.

Advertisement

Table of Contents
loading

Table of Contents