Setup; Connecting To The Printer - Epson DM-D30 Technical Reference Manual

Setup

This chapter explains the installation and setting operations necessary to use this product.

Connecting to the Printer

Connect the USB cable of the customer display to the USB connector on the printer.
 When you connect the USB cable to the printer, be sure to turn off the printer before connect-
ing.
 We do not recommend using this USB bus power device with a USB extension cable. Depending
on the configuration of the cable, operational errors or a deterioration in EMC characteristics
may occur due to a drop in voltage.
For the position of connectors on the printer and so on, see the documentation provided with the
printer.
Chapter 2 Setup
2
15