Connecting To A Printer; To Connect To A Printer - Casio PA-2400U Service Manual And Parts List

6. Insert a new CompactFlash card into the slot.
• Double-check to make sure that the card is oriented correctly before you insert it into the slot.
• Push the card into the slot as far as it will go.
Important
• Take care to orient the card correctly. The top of the card should be facing in the same direction as the
top of the CASSIOPEIA. The card will stop part way into the slot if it is not oriented correctly.
7. Replace the card cover.
Important
• In order to protect data stored in memory, the CASSIOPEIA automatically turns off whenever you re-
move the card cover. Also, power will not turn on while the cover is removed.
8. Return the card lock switch to its original position.

CONNECTING TO A PRINTER

Use the following procedure to connect the CASSIOPEIA to a printer.
Requirements
• RS-232C cable (supplied with CASSIOPEIA)
• Converter (commercially available)*
* Use a printer or a converter that matches the interface shown on page 18.

To connect to a printer

1. Make sure the printer and the CASSIOPEIA are both turned off.
2. Connect the converter to the connector of the RS-232C cable, and then connect the cable to your printer
and the CASSIOPEIA.
• If your printer supports infrared communications, you can also send data using the CASSIOPEIA's
infrared port.
RS-232C Cable
— 17 —
Converter
Connect to printer