Table of Contents
Advertisement
Setup for New Users
Important!
To View your Wireless IP Setup
Setup
1. Press
2. Use the
or press End (On Hook).
The following screens display when using the Up/Down
Note
arrows:
• SSID screen
• Boot option DHCP screen – To edit this screen press the Edit
soft key, make the change, then press SK1 (OK soft key).
• IP Settings screen
• Network Information and MAC Address screen
• LCD Contrast – You can adjust the contrast on your screen
using SK2 and SK3
• Flexible Button Label Editor screen – You can change the
labels of the flexible buttons on your screen. See
Flexible Buttons" on page
Vibrate Mode
To enable, press
To disable, press
5
Ask your System Administrator if your WIPT has
been setup and ready to use. If the telephone is not
setup, then you will require the following
information – SSID, DHCP, Telephone IP address,
subnet mask, router address, Station ID, and the
IP Address for the BIPU.
button. The Local Setup screen displays.
and
arrows to go through the different screens
Mute
Mute
Draft - Wireless IPT Quick Reference Guide 10/04
8.
and
arrow.
and
arrow.
"To Label
Advertisement
Table of Contents
