Unlocking Your Phone; View Of Phone; Installing And Removing The Battery - Verizon NX9200 User Manual

Unlocking Your Phone

If you received your Verizon Wireless NX9200 in the mail, you may need to unlock it before making calls.
1. Press the END/PWR Switch for 2~3 seconds.
Unlock
2. Highlight and press .
3. Enter your four-digit lock code. For security purposes, the code will not be visible as you type.
Note: If you can't recall your lock code, try using the last four digits of your Social Security number, the
last four digits of your Verizon Wireless Phone Number or 0000.

View of Phone

1. END/PWR Switch: Lets you power the phone on or off.
2. Antenna: Fixed antenna provides optimum reception for 800MHz/ 1900 MHz frequencies.
3. Headset Jack: Provides connection for an optional headset.
4. Volume Control Keys: Adjust the Ring Volume in the Main Menu or the Voice Volume during a call.
5. Navigation Key: Allows quick and easy scrolling through the menus.
6. OK: Lets you place a call, receive a call, end a call or select menu options.
7. CLR: Lets you clear an entry or back-up in the menu.
8.
Folder : Lets you answer or end calls.

Installing and Removing the Battery

To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then,
push the battery down and revolve the button to lock the battery, using your nails or coins.
To remove the battery, follow the steps above backward to remove the battery from the phone.
- 7 -