The Following Fault Messages Appear In The Display At The End Of The Programme - Miele WMV 960 WPS Operating Instructions Manual

The following fault messages appear in the display at the end of
the programme
Message

Check dosage

Hygiene info: Start a
programme with a
minimum temperat-
ure of 75°C.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
Cause and remedy
Excessive foam has built up during washing.
 Check the amount of detergent dispensed.
 With automatic detergent dispensing check the
dosage amount set.
 Observe the instructions on the detergent pack-
aging and the degree of soiling of the laundry.
 If necessary, reduce the dosage amount by incre-
ments of 10%.
A programme using a temperature above 60 °C has
not been run for a long time.
 In order to prevent bacteria and unpleasant odours
building up in the machine, run the Maintenance
wash programme using Miele machine cleaner or
powder detergent.
Problem solving guide
77