Insert Dialling Codes - Nokia 2112 User Manual

Note: Voice mail services vary by service provider. The following instructions
are examples of common operations. Please check with your service provider for
specific instructions for using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in mind
that each voice mail service may vary. However, it should look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press *.
Be precise; you will need this information in Set up voice mail with dialling codes,
37.

Insert dialling codes

Press * repeatedly to cycle through dialling codes. Once the desired code appears in the
display, pause briefly and the code is inserted into the dialling string.
The following dialling codes are available:
Dialling code
*
+
p
w
Set up voice mail with dialling codes
1. At the start screen, press
2. Scroll to an empty speed dialling slot, and press Assign.
3. Enter your voice mailbox number, including the area code.
4. Refer to dialling codes and enter any codes as necessary using the information that
you wrote down from Set up voice mail with dialling codes, 37.
Indicates...
Bypasses a set of instructions.
Replaces the international access code.
Pauses for 2.5 seconds before sending any numbers
that follow.
Waits for you to press the Send key before sending
the numbers or codes that follow.
Contacts > Speed dials
Messages (Menu 1)
> Select.
Copyright © 2004 Nokia